Harman AMX DVX Series User Manual

55
NO Command Syntax Example
3 VI<input>O<output>
Command:
SEND_COMMAND <DEV>,
"'VI<input>O<output>'"
Return:
SWITCH-LVIDEOI<input>O<output
>
Description:
Switches input to one or more
outputs for switcher level Video. Set
<input> to 0 for disconnect.
input = The source input port
number.
output = The output port number to
switch to.
Command:
SEND_COMMAND
SWITCHER, “'VI1O1,2’”
Return:
SWITCH-LVIDEOI1O1
SWITCH-LVIDEOI1O2
Description:
Switch video input port #1
to output port #1 and #2.
4 ?INPUT
Command:
SEND_COMMAND <DEV>,
“‘?INPUT-<sl>,<output> '"
Return:
SWITCH-L<sl>I<input>O<output>.
Description:
Requests which audio or video input
ports are connected to the output
port. If the output port is not
connected to any input port then
the reply will indicate this with an
input port number of ZERO (0).
Variables:
sl = AUDIO or VIDEO.
output = The output port number.
Command:
SEND_COMMAND
SWITCHER,
“'?INPUT-AUDIO,1 '"
Return:
SWITCH-LAUDIOI1O1
Description:
Requests which audio input
ports are connected to the
output (audio group) port
#1.

Harman AMX DVX Series Specifications

General

Brand	Harman
Model	AMX DVX Series
Category	Projector Accessories
Language	English