Harman AMX DVX Series User Manual

56
NO Command Syntax Example
5 ?OUTPUT
Command:
SEND_COMMAND <DEV>,
“‘?OUTPUT-<sl>,<input> '"
Return:
SWITCH-L<AUDIO|VIDEO>I<input>
O<output>.
Description:
Requests which audio or video
output ports are connected to the
input port. If the output port is not
connected to any input port then
the reply will indicate this with an
input port number of ZERO (0).
Variables:
sl = AUDIO, VIDEO, or ALL. ALL =
both AUDIO -and- VIDEO.
input = The source input port
number.
Command:
SEND_COMMAND
SWITCHER,
“'?OUTPUT-VIDEO,1 '"
Return:
SWITCH-LVIDEOI1O1,2,3,4
Description:
Requests which video output
ports are connected to the
input port #1
6 ?VIDIN_STATUS
Command:
SEND_COMMAND <DEV>,
"'?VIDIN_STATUS'"
Return:
VIDIN_STATUS-<status>
Description:
Requests the status of the video
input port addressed by D:P:S.
<status>
{
NO SIGNAL;
VALID SIGNAL;
}
Command:
SEND_COMMAND
VIDEO_INPUT_1,
“?VIDIN_STATUS"
Return:
VIDIN_STATUS-NO SIGNAL
7 VIDIN_PREF_EDID
Command:
SEND_COMMAND <DEV>,
“‘VIDIN_PREF_EDID-<resolution>
'"
Return:
VIDIN_PREF_EDID-<resolution>
Description:
Command:
SEND_COMMAND
VIDEO_INPUT_1,
“'VIDIN_PREF_EDID-1920x1
200,60'"
Return:
VIDIN_PREF_EDID-1920x120
0,60

Harman AMX DVX Series Specifications

General

Brand	Harman
Model	AMX DVX Series
Category	Projector Accessories
Language	English