4
P35i Fireplace Insert
Pellets or Corn/Pellet Mixture Only
Save These Instructions
3-90-775R15_04/13
1
Listing and Code Approvals
A. Appliance Certication
Model: P35iInsert
Laboratory: OMNI-TestLaboratories,Inc.
ReportNo. 135-S-25-6.2
Type: SolidFuelRoomHeater/Fireplace
Insert.
Standard(s): ASTME1509-04,ULCS628-93and
ULC/ORDC1482-M1990
This appliance is also approved for installation in a
shop.
B. Mobile Home Approved
This appliance is approved for Installation in mobile/
manufactured homes. The structural integrity of the
mobile home oor, ceiling and walls must be maintained.
Theappliancemustbeproperlygroundedtotheframeof
the mobile home, and must never be installed in a room
designatedforsleeping.Theunitmusthaveprovisionsfor
anoutsideairsourcewheninstalledinamobilehome.
C. Glass Specications
Thisapplianceisequippedwith5mmceramicglass.Replace
glass only with 5mm ceramicglass. Please contactyour
dealerforreplacementglassifneeded
D. Electrical Rating
115VAC,60Hz,
3.6Amps(Start-up);avg.1.5Amps(NormalRun)
E. BTU & Efciency Specications
* BTU input will vary, depending on the type of fuel you
use in your stove. Moisture and ash content can affect
performance.
†Cornisapprovedforburningonlywhenmixedwithwood
pellets.
HopperCapacity-
#1-70-774235(23½")
ParticulateEmissions
Rating:
*BTUInput:
HeatingCapacity:
HopperCapacity-
#1-70-774195(19½")
Fuel:
ShippingWeight:
41lbs.
Woodpellets/Corn†
289lbs.
1,500sq.ft.
0or6,000-35,000/hr
ExemptfromEPAper
40CFR,Method28A
62lbs.