Harman® • P-Series Installation Manual_R3 • 2014 -___ • 09/147 3-90-436168i
ReciprocatingSaw
Hammer
PhillipsScrewdriver
TapeMeasure
Level
Non-CombustibleSealant
Material
Gloves
SafetyGlasses
ElectricDrill&Bits
Mayalsoneed:
VentSupportStraps
VentingPaint
Tools and building supplies normally required
for installation, unless installing into an existing
masonry replace:
B. Tools And Supplies Needed
C. Inspect Appliance and Components
• Carefullyremovetheapplianceandcomponentsfromthe
packaging.
• Theventsystemcomponentsanddecorativedoorsand
frontsmaybeshippedinseparatepackages.
• Report to your dealer any parts damaged in shipment,
particularlytheconditionoftheglass.
• Read all of the instructions before starting the
installation. Follow these instructions carefully during
the installation to ensure maximum safety and benet.
WARNING! Risk of Fire or Explosion! Damaged parts
could impair safe operation. DO NOT install damaged,
incompleteorsubstitutecomponents.Keepappliancedry.
Hearth&HomeTechnologiesdisclaimsanyresponsibility
for,andthewarrantywillbevoidedbythefollowingactions:
• Installationanduseofanydamagedapplianceorvent
systemcomponent.
• Modicationoftheapplianceorventsystem.
• InstallationotherthanasinstructedbyHearth&Home
Technologies.
• Installation and/or use of any component part not
approvedbyHearth&HomeTechnologies.
Any such action may cause a re hazard.
WARNING
Risk of Fire, Explosion or Electric Shock! DO NOT use
this appliance if any part has been under water. Call a
qualied service technician to inspect the appliance
and to replace any part of the control system which
has been under water.