Turn power off, remove the 4 screws from the
header controls cover and remove the panel.
Remove screws from control cover
Lift the cabinet top slightly, then remove the 4
screws from the control cover and remove.
Remove screws from header cover
Step 1 Step 2
Remove pressure hose from front of fuel/air mixer.
Rotate mixer clockwise and pull straight out to
remove.
Remove fuel/air mixer
12
Re-install/install new mixer back into blower and
rotate counter clockwise to reinstall and reconnect
pressure hose to front of fuel mixer.
Re-install/install fuel/air mixer
Step 3
Step 4
How To: Change/Replace Fuel/Air Mixer
To Next Page
Loading...
Need help?
General
