Hikmicro CONDOR Series User Manual

Thermal Monocular User Manual
7
Figure 2-8 Check Firmware Status
3. (Optional) If the firmware is not the latest version, upgrade the device. See Upgrade
Device.
2.7.2 Upgrade Device
Upgrade Device via HIKMICRO Sight
Before You Start
Install HIKMICRO Sight on your phone and connect your device to the app.
Steps
1. Tap the upgrade prompt to enter the firmware upgrade interface.
2. Tap Upgrade to start upgrade.
Note
The upgrading operation may vary due to app updates. Please take the actual app
version for reference.
Upgrade Device via PC
Before You Start
Please get the upgrade package first.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select , and press to enter the configuration interface.
4. Press or to select USB Flash Drive.
5. Connect the device to your PC with cable.
6. Open the detected disk, copy the upgrade file and paste it to the root directory of the
device.
7. Disconnect the device from your PC.
8. Reboot the device.

Hikmicro CONDOR Series Specifications

General

Brand	Hikmicro
Model	CONDOR Series
Category	Monocular
Language	English