Hikmicro CONDOR Series User Manual

Thermal Monocular User Manual
17
Result
The details of the zoomed live view image will be enhanced.
Note
●
If the PIP function is enabled, zoom pro is only enabled in the PIP view.
●
Zoom Pro cannot be enabled when device battery is low.
3.15 Auto Screen Off
Auto screen off function darkens the screen to save energy and increase battery time.
However, the device stays on and you can view the live view on HIKMICRO Sight app when
connecting the device to the app.
Steps
1. Enable auto screen off.
1). Hold to show the menu.
2). Go to Advanced Settings, and press or to select .
3). Press to enable auto screen off.
4). Hold to save settings and exit.
2. You can do one of the following methods to enter the standby mode when the display is
turned on:
–
Tilt the device downwards more than 70°.
–
Rotate the device horizontally more than 75°.
–
Keep the device still and do not move it for 5 minutes.
Figure 3-8 Standby Mode
3. You can do one of the following methods to wake up the device when the display is
turned off:
–
Tilt the device downwards from 0° to 60° or upwards .
–
Rotate the device horizontally from 0° to 75°.
–
Press to wake up the device.

Hikmicro CONDOR Series Specifications

General

Brand	Hikmicro
Model	CONDOR Series
Category	Monocular
Language	English