Thermal Monocular User Manual
9
Chapter 3 Image Settings
You can set palettes, brightness, scenes, FFC (flat field correction), and DPC (defective
pixel correction) to display the better image effect.
3.1 Adjust Diopter
Make sure the eyepiece covers your eye and aim at the target. Adjust the diopter
adjustment ring until the OSD text or image is clear.
Note
When adjusting diopter, DO NOT touch the surface of lens to avoid smearing the lens.
Figure 3-1 Adjust Diopter
3.2 Adjust Focus
Slightly rotate the focus ring to adjust the focus of the objective lens.
Figure 3-2 Adjust Objective Lens