Hikmicro CONDOR Series User Manual

Thermal Monocular User Manual
21
Chapter 5 General Settings
5.1 Set OSD
This function can display or hide the OSD information on the live view interface.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select , and press to enter OSD setting interface.
4. Press or to select the Time, Date, or OSD, and press to turn on or turn off
the selected OSD information.
5. Hold to save and exit.
Note
If you turn off OSD, all OSD information on the live view will not be displayed.
5.2 Set Brand Logo
You can add brand logo to the live view interface, snapshots, and videos.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select .
4. Press to enable Brand Logo.
5. Hold to save the settings and exit.
Result
The brand logo is displayed at the bottom left of the image.

Hikmicro CONDOR Series Specifications

General

Brand	Hikmicro
Model	CONDOR Series
Category	Monocular
Language	English