Thermal Image Scope User Manual
15
Note
● If digital zoom is enabled, the PIP view also zooms. If the digital zoom ratio exceeds 4, the PIP
does not zoom.
● This function varies according to different camera models.
3.10 Adjust Digital Zoom
You can zoom the image by using this function.
Press in the view mode, the live view switches between 1×, 2×, 4×, and 8×.
Note
This function varies according to different camera models.
3.11 Set OSD
In the live view interface, press to display or hide the OSD information.
3.11.1 Synchronize Time
Steps
1. Hold to show the menu.
2. Select , and press to enter the time setting interface.
3. Press to switch the time system, and press and to select the time and date to be
synchronized.
4. Press to select the hour, minute, second, year, month, or day to be synchronized, and
press and again to change the number.
5. Hold to save settings and exit.
3.12 Set Brand Logo
You can add brand logo on the live view interface.
Steps
1. Hold to show the menu.
2. Press or to select .
3. Press to enable Brand Logo.
4. Hold to save the settings and exit.
To Next Page
Loading...
Need help?
General
