Hikmicro Thunder Pro TQ50C User Manual

Thermal Image Scope User Manual
25
Chapter 9 Client Software Connection
Connect the device to the HIKMICRO Sight App via hotspot, then you can capture picture, record
video, or configure parameters on your phone.
Steps
1. Hold to show the menu of device.
2. Press to enable hotspot function.
3. Turn on the WLAN of your phone and connect to the hotspot.
● Hotspot Name: HIK-IPTS Serial No.
● Hotspot Password: the last 9 digits of serial No.
4. Search the HIKMICRO Sight App on App Store (iOS System) or Google Play™ (Android System) to
download it, or scan the QR code to download and install the app.
Android System
iOS System
5. Open the App and connect your phone with the device. You can view the interface of device on
your phone.
Note
● The device cannot connect to the app if entering wrong password several times. Refer to
Restore Device to reset the device, and connect the app again.
● The device should be activated for the first use. The default password must be changed after
the activation.

Hikmicro Thunder Pro TQ50C Specifications

General

Brand	Hikmicro
Model	Thunder Pro TQ50C
Category	Monocular
Language	English