HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 14
2. Click the up/down or left/right buttons in the PTZ control panel to choose a value from the list.
3. Press IRIS+ to confirm the change or click IRIS- to cancel and restore the original value. The cursor
shape will again change.
Configuring System Information
Checking System Information
Purpose:
The system information menu displays the current system information of the speed dome, including
model, address, protocol, etc. The information shown on this submenu is similar to the system
information shown after the power-up action. Please refer to
Section 2.1
for more details.
1. Enter the system information display menu: MAIN MENUS > SYSTEM INFO.
Figure 4, System Information
NOTE:
• Information on this menu cannot be edited.
• The temperature refers to the internal temperature of the speed dome.
Configuring System Parameters
Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc. on
the system information settings menu.
1. Go to MAIN MENUS > DOME SETTINGS > SYSTEM INFO SETTINGS.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
