HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 37
Figure 22, CLEAR SETTINGS
2. Move the cursor to the item you want to clear, and click IRIS+ to validate the settings.
3. Move the cursor to DIAGNOSTICS, and click IRIS+ to diagnose the temperature exception, video
exception, voltage exception, etc.
NOTE: The function varies by camera model.
Configuring and Handling Alarms
NOTE: The alarm related function is not supported by the 7-inch IR speed dome.
Configuring Alarm Input and Linkage Actions
Purpose:
This section states how to configure the speed dome to respond to alarm events with alarm linked
actions such as calling presets, patrols, patterns, scanning, etc.
1. Move the cursor to enter the alarm configuration submenu: MAIN MENUS > DOME SETTINGS > ALARMS.
Figure 23, Alarm Configuration Menu
2. Choose the alarm number.
A. Move the cursor to ALARM NUM and click the IRIS+ to enter the editing mode.

HIKVISION DS-2AE7232TI-A Specifications

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C

Weight and Dimensions

Height	353.4 mm
Weight	4500 g
Diameter	220 mm