HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 21
• The IRCUT FILTER cannot be configured unless the IR light is turned off.
- D/N LEVEL. The D/N level is the light level for the auto D/N mode switch. As a threshold, the IR cut
filter switches between DAY and NIGHT when the light condition reaches the user-defined D/N
level.
NOTE: The D/N level option varies by camera model. Some models do not support user-defined D/N
level.
Configuring the Sharpness Level
The sharpness function can increase the image gain and sharpen edges to enhance details. You can set
the SHARPNESS level from 0 to 15.
Configuring the BLC and WDR
BLC/WDR and BLC LEVEL varies by camera model. Some models don’t support user-defined BLC level.
• BLC/WDR. You can set the value to ON or OFF to enable or disable the functions.
• BLC LEVEL. You can manually adjust the backlight compensation level.
Configuring the Iris, Gain, and Shutter Speed
Set the Exposure Mode
Purpose:
AE mode defines the priority of iris, shutter, and gain while the speed dome adjusting the brightness of
the live view. You can change the mode on AE MODE submenu.
• AUTO: Auto iris, auto shutter and auto gain. The speed dome adjusts the values automatically
responding to the lighting conditions. It is the default mode.
• IRIS: User-defined iris value, auto shutter, and auto gain. It is the iris-priority mode. Define the iris value
according to related content in this section if you choose IRIS mode.
• SHUTTER: User-defined shutter speed, auto iris, and auto gain. It is the shutter-priority mode. Please
define the shutter speed according to related content in this section if you choose SHUTTER mode.
• MANUAL: User-defined iris, gain, and shutter. Please define the iris value, gain value, and shutter speed
according to related content in this section if you choose MANUAL mode.
Setting the Iris Value
The IRIS value measures the amount of light entering the lens. You can set the iris value from 0 to 17 in
response to the changing light conditions. The iris is fully closed at value 0 and fully open at value 17.
Setting the Gain
• Gain Value. Indicates amplification degree of the original image signal. You can set value from 0 to 15.
• Gain Limit. The higher the gain value, the more noise will appear in the image. You can set the maximum
user configurable gain value from 0 to 15 to limit the gain range and control the noise in the image.

HIKVISION DS-2AE7232TI-A Specifications

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C

Weight and Dimensions

Height	353.4 mm
Weight	4500 g
Diameter	220 mm