HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA 25
D. To modify the configured mask, click the IRIS+ button to enter the SET BLANK menu and click
the IRIS+ button again to edit focus limit.
NOTE: The tilt range for configuring the privacy blanks is from -15° to 60°.
4. Enable or disable the privacy blank function.
A. Move the cursor to BLANK STATUS. Click the IRIS+ button to enter editing mode and click the up
and down direction buttons to set it ON or OFF.
NOTE: If no privacy blank has been configured, you cannot set the status to ON.
B. Delete the privacy blank.
NOTE: You can enter the CLEAR BLANK menu to delete all configured privacy blanks.
Configuring Output Standard
Purpose:
The video output standard, including resolution and frame rate, can be changed according to the actual
requirement.
1. Move the cursor to enter the Video Settings submenu: MAIN MENUS > DOME SETTINGS > VIDEO SET.
2. Move the cursor to VIDEO STD and click IRIS+ to enter the editing mode.
3. Click the up and down direction buttons to select a desired video standard.
4. Click IRIS+ again to confirm and exit the editing mode.
Configuring IR Parameters
NOTE: The IR parameter settings are supported by IR speed domes only.
Purpose:
You can configure the IR parameters including the IR sensitivity, n/m LED current, far LED current,
reference zoom, and LED control, fan control, switch delay, smart IR, etc.
1. Enter the LED parameter submenu: MAIN MENU > DOME SETTINGS > IR PARAMETER.

HIKVISION DS-2AE7232TI-A Specifications

General

Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
Total megapixels	2 MP
Gain control type	Auto/Manual
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Analog signal format system	NTSC, PAL
Form factor	Dome
Mounting type	Ceiling/wall
Product color	White
International Protection (IP) code	IP66
Type	CCTV security camera
PTZ modes	5 Pattern
PTZ protocols	Pelco-P/D
Languages support	English
Number of languages	1
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Digital zoom	16 x
Optical zoom	32 x
Focal length range	4.8 - 153 mm
Maximum aperture number	4.6
Minimum aperture number	1.6
Built-in HDD	No
LED type	IR
Night vision distance	150 m
AC input voltage	24 V
Power source type	AC
Power consumption (max)	40 W
Pan range	0 - 360 °
Pan speed	160 °/sec
Tilt angle range	-15 - 90 °
Camera shutter speed	1/10000 - 1 s
Minimum illumination	0 lx
Interface	BNC
Operating temperature (T-T)	-30 - 65 °C

Weight and Dimensions

Height	353.4 mm
Weight	4500 g
Diameter	220 mm