HIKVISION DS-2DF7284-AW User Manual

User Manual of IR Network Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
27
36
Call patrol 2
96
Stop a scan
37
Call patrol 3
97
Start random scan
38
Call patrol 4
98
Start frame scan
39
IR cut filter in
99
Start auto scan
40
IR cut filter out
100
Start tilt scan
41
Call pattern 1
101
Start panorama scan
42
Call pattern 2
102
Call patrol 5
43
Call pattern 3
103
Call patrol 6
44
Call pattern 4
104
Call patrol 7
92
Start to set limit stops
105
Call patrol 8
Figure 4-7 Special Preset
Note: You may need to use the OSD(On Screen Display) menu when controlling the
speed dome remotely. To display the OSD menu on the live view screen, you can call
the preset number 95.
4.5.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .
3. Click to enter the adding interface of preset as shown in Figure 4-8.
www.cctvireland.ie

HIKVISION DS-2DF7284-AW Specifications

General

Brand	HIKVISION
Model	DS-2DF7284-AW
Category	Security Camera
Language	English