User Manual of IR Network Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 7-2 Initialize Disk
Figure 7-3 Initializing
When the initialization completed, the status of disk will become Normal as
shown in Figure 7-4.
Figure 7-4 View Disk Status
Notes:
Up to 8 NAS disks can be connected to the speed dome.
To initialize and use the SD card after insert it to the speed dome, please refer to
the steps of NAS disk initialization.
7.2 Configuring Recording Schedule
Purpose:
There are two kinds of recording for the speed domes: manual recording and
scheduled recording. For the manual recording, refer to Section 4.4 Recording and
Capturing Pictures Manually. In this section, you can follow the instructions to
configure the scheduled recording. By default, the record files of scheduled recording
are stored in the SD card (if supported) or in the network disk.
Steps:
1. Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
To Next Page
Loading...
Need help?
General
