Chapter 5 Live View
It introduces the live view parameters, funcon icons and transmission parameters sengs.
5.1 Live View Parameters
The supported funcons vary depending on the model.
Note
For mulchannel devices, select the desired channel rst before live view sengs.
5.1.1 Start and Stop Live View
On Live View page, click to start all live view. Click to stop all live view.
You can also start the live view of the channels one by one through clicking a divided window
rst
and double-clicking a channel from the channel list on le.
5.1.2 Aspect
Rao
Aspect Rao is the display rao of the width to height of the image.
●
refers to 4:3 window size.
●
refers to 16:9 window size.
●
refers to original window size.
●
refers to self-adapve window size.
5.1.3 Window Division
You can choose a layout for live view window.
●
displays one live image. You can click to switch between channels.
●
displays live images in 2 × 2 layout.
●
displays live images in PIP (picture in picture) layout.
●
displays live images in 1 × 2 layout.
●
displays live images in 2 × 1 layout.
5.1.4 Live View Stream Type
Select the live view stream type according to your needs. For the detailed informaon about the
stream type selecon, refer to Stream Type .
TandemVu PTZ Camera User Manual
28