User Manual of Digital Video Recorder
106
9.2 Configuring Advanced Settings
9.2.1 Configuring Extranet Access
You can choose the access to the DVR by EZVIZ Cloud P2P or by DDNS through the settings on the Extranet
Access menu.
Configuring EZVIZ Cloud P2P
Purpose:
EZVIZ Cloud P2P provides the mobile phone application and as well the service platform page to access and
manage your connected DVR, which enables you to get a convenient remotely access to the surveillance
system.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the Extranet Access tab to enter the EZVIZ Cloud P2P Settings interface.
3. Check the Enable EZVIZ Cloud P2P checkbox to activate this feature.
4. The default server address is dev.ezviz7.com. If you want to customize the server, you can enable the
Custom and enter the server address in the text field.
5. If required, check the Enable Stream Encryption checkbox to encrypt the video stream.
6. Enter the verification code of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR. You can also use the
scanning tool of your phone to quickly get the code by scanning the QR code below.
Figure 9. 2 EZVIZ Cloud P2P Settings Interface
To Next Page
Loading...
Need help?
General