User Manual of Digital Video Recorder
128
10.3 Checking HDD Status
Purpose:
You may check the status of the installed HDD on device so as to take immediate check and maintenance in
case of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Check the status of each HDD which is displayed on the list.
Figure 10. 8 View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal,
please initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. Click the HDD tab to view the status of HDD displayed on the list.
Figure 10. 9 View HDD Status (2)
To Next Page
Loading...
Need help?
General