HIKVISION DS-7108NI-Q1/M User Manual

Chapter 5 Conguraon (Easy Mode)
Easy mode contains basic conguraons. Go to Conguraon , and click Easy Mode.
5.1 System Conguraon
5.1.1 General
You can congure the output resoluon, system me, etc.
Steps
1. Go to Conguraon → System → General .
Figure 5-1 General Sengs
2. Congure the parameters as your desire.
Wizard
The wizard will pop up aer the device starts up.
Lock Screen Password
You need to enter your password if the screen is locked.
NTP Time Sync
Network me protocol (NTP) is a networking protocol for me synchronizaon. The device
can connect to NTP (network
me protocol) server to sync me.
Interval (min)
Network Video Recorder User Manual
16

HIKVISION DS-7108NI-Q1/M Specifications

General

DC voltage	12 V
Power supply type	DC
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Video input channels	8 channels
USB 2.0 ports quantity	2
VGA (D-Sub) output ports	1
Supported network protocols	TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Maximum HDD capacity	6000 GB
Video compression formats	H.264, H.265

Weight and Dimensions

Depth	225 mm
Width	260 mm
Height	48 mm
Weight	1000 g