HIKVISION DS-7108NI-Q1/M User Manual

Upgrade the added network cameras.
Protocol
To connect the network cameras which are not congured with the standard protocols, you
can congure the customized protocols for them. The system provides 16 customized
protocols.
Camera Acvaon Password Sengs
Change the default password for acvang and adding network camera.
6.3.2 Display Sengs
Congure the OSD (On-Screen Display), image sengs, exposure sengs, day/night switch
sengs, etc.
Steps
1. Go to Conguraon → Camera → Display .
2. Set Camera.
3. Congure parameters as your desire.
OSD
Sengs
Congure the OSD (On-screen Display) sengs for the camera, including date/me, camera
name, etc.
Image Sengs
Customize the image parameters including the brightness, contrast, and saturaon for the
live view and recording
eect.
Exposure
Set the camera exposure me (1/10000 to 1 sec). A larger exposure value results in a
brighter image.
Day/Night Switch
The camera can be set to day, night, or auto switch mode according to the surrounding
illuminaon condions.
Backlight
Set the camera's wide dynamic range (0 to 100). When the surrounding illuminaon and the
object have large dierences in brightness, you should set the WDR value.
Image Enhancement
For opmized image contrast enhancement.
Network Video Recorder User Manual
52

HIKVISION DS-7108NI-Q1/M Specifications

General

DC voltage	12 V
Power supply type	DC
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Video input channels	8 channels
USB 2.0 ports quantity	2
VGA (D-Sub) output ports	1
Supported network protocols	TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Maximum HDD capacity	6000 GB
Video compression formats	H.264, H.265

Weight and Dimensions

Depth	225 mm
Width	260 mm
Height	48 mm
Weight	1000 g