HIKVISION DS-7108NI-Q1/M User Manual

Figure 5-7 Add Network Camera
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Conguraon → Camera → IP Camera .
2. Click to edit the selected camera.
Channel Port
If the connected device is an encoding device with
mulple channels, you can select the
channel port No. to choose a connecng channel.
3. Click OK.
5.3.2 OSD
Sengs
Congure OSD (On-Screen Display) sengs for the camera, including date format, camera name,
etc.
Network Video Recorder User Manual
24

HIKVISION DS-7108NI-Q1/M Specifications

General

DC voltage	12 V
Power supply type	DC
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Video input channels	8 channels
USB 2.0 ports quantity	2
VGA (D-Sub) output ports	1
Supported network protocols	TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Maximum HDD capacity	6000 GB
Video compression formats	H.264, H.265

Weight and Dimensions

Depth	225 mm
Width	260 mm
Height	48 mm
Weight	1000 g