HIKVISION DS-7108NI-Q1/M User Manual

Device ID
The Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Encrypon Password
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP plaorm.
5. Click Apply to save the sengs and restart the device.
What to do next
You can see the online status (online or oine) aer the device is restarted.
6.2.6 Guarding Vision
Go to Conguraon → Network → Plaorm Access . Refer to Guarding Vision for details.
6.3 Camera Management
6.3.1 Network Camera
Add Automacally Searched Online Network Camera
Add the network cameras to your video recorder.
Before You Start
• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connecon is valid and correct.
• Ensure the network camera password is the same as your video recorder.
Steps
1. Go to
Conguraon → Camera → Camera → IP Channel .
2. Click Online Device List. The online cameras on the same network segment will be displayed in
the list.
Network Video Recorder User Manual
46

HIKVISION DS-7108NI-Q1/M Specifications

General

DC voltage	12 V
Power supply type	DC
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Video input channels	8 channels
USB 2.0 ports quantity	2
VGA (D-Sub) output ports	1
Supported network protocols	TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Maximum HDD capacity	6000 GB
Video compression formats	H.264, H.265

Weight and Dimensions

Depth	225 mm
Width	260 mm
Height	48 mm
Weight	1000 g