HIKVISION DS-7204HI-S Series User Manual

11
Stop using IR remote control
When DVR controlled by IR remote control, press [DEV] key again, then the IR
remote control can not control this DVR.
Switch the DVR off
When IR remote control is working, press [POWER] key for several seconds,
then the power off prompt will pop up, press [Confirm] and switch off the power on
the rear panel manually.
When IR remote control can not work normally
 Check batteries poles.
 Check the remaining charge in the batteries.
 Check IR remote control sensor is masked.
 Please change another IR remote control and try again. If the problem still exists,
please contact administrator.
3.3 Menu Description
3.3.1 Menu Items
Table 3.3 First Glance at menu
Menu Name
Function
Menu Name
Function
Display
Device ID
Enable password
Screen saver
Video standard
Enable scale
Brightness
Menu transparency
VGA resolution
Date/Time
Preview
Camera
Select camera
Name
Color
Date OSD
Motion Det. Level
Advanced Settings
Copy to camera
Recording
If HD Full
Select camera
Stream type
Resolution
Frame rate
Bit rate
Enable Rec
Network
IP
Port
Mask
Gateway
Http Port
Advanced Settings
PPPoE

HIKVISION DS-7204HI-S Series Specifications

General

Brand	HIKVISION
Model	DS-7204HI-S Series
Category	DVR
Language	English