User Manual of Embedded Net DVR
Page 34 Total 113
4.5 Manual Record
Note: The user must have the corresponding right, DVR has HDD and HDD is formatted
already.
Manual record
In preview mode, pressRECkey, in the pop-up login dialog, select the name and input the
correct password, you can enter into the “Manual Record” interface.
In menu mode, pressRECkey to enter into “Manual Record” interface directly.
Description
Manual record interface has following parts: channel number, channel status, start/stop record,
start all and stop all buttons.
Channel: List the channel number that DVR has.
Status: Channel work status has 4 cases:
means idle. Green means the channel is recording
(including real time recording, alarm recording, motion detection recording). Red means network
tramsmission. Orange means both recording and network transmission.
Start/Stop: “9” means you can start corresponding channl recording. “×” menas you can stop
recording.
Start All: Press this button to start all channels recording.
Stop All: Press this button to stop all channel recording.
Exit manual record
PressESCkey to enter into preview mode. PressMENUkey to enter into main menu. Press
PLAYkey to enter into playback menu. PressPTZkey to enter into PTZ control mode.
To Next Page
Loading...
Need help?
General