User Manual of Embedded Net DVR
Page 54 Total 113
5.6 Video Parameters Setup
For different camera and different background, in order to get the best video image, you need to
adjust video parameters such as brightenss, saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video parameters of one
camera to any other cameras. Here are the setup steps:
Step 1: Enter into “Image Setup” menu:
Step 2: Select camera: Please useÇÈkeys to select one camera.
Step 3: Adjust brightness, contrast, saturation and hue: Move “Active Frame” to the
“Adjust” button on the right side of Brightness, Contrast, Saturation and Hue, press ENTERkey,
you will enter into the corresponding adjust interface. In the adjust interface, there is one scroll bar
at the bottom, you can useÇÈkeys to adjust and can find the video image will be changed at
the same time. When you are satisfied with the real time video image, pressENTERto return
“Image Setup” menu.
Step 4: You can copy the video parameters of current camera to any other cameras. Or you can
repeat setp2 and step3 to adjust for any other camera.
After adjust, in “Image Setup” menu, press “Confirm” button to save parameters and make
them into effective. Otherwise, perss “Cancel” button orESCkey to abort modification.
To Next Page
Loading...
Need help?
General