User Manual of Embedded Net DVR
Page 43 Total 113
Shut down DVR normally
Use menu
Enter into “Utilities” menu, move “Active Frame” to “Power Off” button and enter into power
off dialog, press “Confirm” to shut down the DVR.
UsePOWERkey of front panel or IR controller
PressPOWERkey for above 3 seconds.
In preview mode, a login dialog will pop-up, select user name and input password, press
Enterto enter into power off dialog and press “Confirm” to shut down DVR. If you input error
password for three times, DVR will return preview mode.
In menu mode, if the user has “Utilities” right, you can enter into power off dialog, press
“Confirm” to shut down DVR. Otherwise, the user can not shut down DVR.
If DVR is shut down correctly, thePOWERlamp is in red.
Note: When message of “Shut down…” is appeared, please do not pressPOWERkey any
more, otherwise, DVR can not be shut down.
Shut down DVR abnormally
Use the power switch of real panel
When DVR is run, if you switch off the power, the HDD in DVR will be damaged. Please
avoid such operation.
Take away the power cable
Please avoid taking away the power cable directly.
Note: In some cases, when the power supply is abnormal, DVR will be damaged. We suggest
you to use those stable power supplies.
To Next Page
Loading...
Need help?
General