HIKVISION DS-K1T105E-C User Manual

Access Control Terminal·Quick Start Guide
15
Signal input interface of the door status (DOOR_NC, DOOR_COM, DOOR_NO) is
used to recognize whether the door is locked. If the NC interface is connected
for opening door, the NO interface can only be connected for locking door.
4.3.2 The Wiring of Door Contact
Figure 4-4 The Installation of Door Contact

HIKVISION DS-K1T105E-C Specifications

General

Brand	HIKVISION
Model	DS-K1T105E-C
Category	IP Access Controllers
Language	English