HIKVISION DS-K1T341CMF User Manual

Start or stop live view.
Start or stop video recording.
Select the streaming type when starng live view. You can select from the main stream and the
sub stream.
Select the window division type when starng live view.
Full screen view.
8.3 Person Management
Click and add the person's informaon, including the basic informaon, authencaon mode, card,
and ngerprint. And you can also edit user informaon, view user picture and search user
informaon in the user list.
Add Basic
Informaon
Click User → Add to enter the Add Person page.
Add the person's basic
informaon, including the employee ID, the person's name, the and the
user role.
If you select Visitor as the user role, you can set the visit
mes.
Click OK to save the sengs.
Set Permission Time
Click User → Add to enter the Add Person page.
Set Start Time and End Time and the person can only has the permission within the
congured
me period.
Click OK to save the
sengs.
Set Access Control
Click User → Add to enter the Add Person page.
Aer check Administrator in Access Control, the added person can log in the device by
authencaon.
Click OK to save the sengs.
Set Room No.
Click User → Add to enter the Add Person page.
Click Add to add the Floor No. and Room No..
DS-K1T341C Series Face Recognion Terminal User Manual
93

HIKVISION DS-K1T341CMF Specifications

General

Type	Face recognition terminal
Product color	Black, Silver
Cards capacity	3000 cards
Event capacity	150000
Access code reader	-
Authentication type	Access chip/card, Face recognition
Face recognition distance	0 - 2 m
Face recognition duration	0.2 s
Access chip/card reader type	Contact
International Protection (IP) code	IP65
Operating system installed	Linux
Screen shape	Flat
Display diagonal	4.3 \
Maximum resolution	272 x 480 pixels
Touchscreen technology	Capacitive
Total megapixels	2 MP
Ethernet LAN data rates	10, 100 Mbit/s
Power consumption (typical)	10 W
Operating temperature (T-T)	-30 - 60 °C