EasyManuals Logo
Home>HIKVISION>Touch terminals>DS-K1T341CMF

HIKVISION DS-K1T341CMF User Manual

HIKVISION DS-K1T341CMF
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
7.5.1 Authencate via Single Credenal
Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .
Authencate face, ngerprint, card or QR code.
Face
Face forward at the camera and start authencaon via face.
Fingerprint
Place the enrolled ngerprint on the ngerprint module and start authencaon via ngerprint.
Card
Present the card on the card presenng area and start authencaon via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR code in front of the device camera to authencate via QR code.
Note
Authencaon via QR code should be supported by the device.
Password
Enter the password to
authencate via password.
If authencaon completed, a prompt "Authencated" will pop up.
7.5.2
Authencate via Mulple Credenal
Before You Start
Set the user
authencaon type before authencaon. For details, see Set Authencaon Mode .
Steps
1.
If the authencaon mode is Card and Face, Password and Face, Card and Password, Card and
Face and Fingerprint, authencate any credenal according to the instrucons on the live view
page.
Note
The card can be normal IC card, or encrypted card.
If the QR Code Scanning funcon is enabled, you can put the QR code in front of the device
camera to authencate via QR code.
The dimension of the recognized QR code picture should be larger than 6 cm × 6 cm.
2.
Aer the previous credenal is authencated, connue authencate other credenals.
DS-K1T341C Series Face Recognion Terminal User Manual
69

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T341CMF and is the answer not in the manual?

HIKVISION DS-K1T341CMF Specifications

General IconGeneral
TypeFace recognition terminal
Product colorBlack, Silver
Cards capacity3000 cards
Event capacity150000
Access code reader-
Authentication typeAccess chip/card, Face recognition
Face recognition distance0 - 2 m
Face recognition duration0.2 s
Access chip/card reader typeContact
International Protection (IP) codeIP65
Operating system installedLinux
Screen shapeFlat
Display diagonal4.3 \
Maximum resolution272 x 480 pixels
Touchscreen technologyCapacitive
Total megapixels2 MP
Ethernet LAN data rates10, 100 Mbit/s
Power consumption (typical)10 W
Operating temperature (T-T)-30 - 60 °C

Related product manuals