Figure 8-2 Time Sengs
Tap Save to save the sengs.
Time Zone
Select the me zone where the device is located from the drop-down list.
Time Sync. Mode
Manual
By default, the device me should be synchronized manually. You can set the device me
manually.
NTP
Set the NTP server's IP address, port No., and interval.
8.4.3 View Open Source
Soware License
Tap Conguraon → System → System Sengs → About , and tap View Licenses to view the
device license.
8.4.4 Network
Sengs
You can set the port and Wi-Fi parameters.
DS-K1T343 Series Face Recognion Terminal User Manual
65