HIKVISION DS-MCW406 User Manual

Chapter 3 Storage, Playback, and Backup
3.1 Storage
The recorded videos, taped audios, and captured pictures will be stored in the device.
3.1.1 Release Storage Capacity
When the storage capacity is full, you can back up the device data to the computer rst, and then
release the storage capacity.
Steps
1.
Back up
les via USB mode. Refer to "Backup" for details.
2.
Delete the
les backed up under DCIM folder to release the storage capacity.
3.1.2 Record
You can record videos via the device.
Steps
1.
Aer the device starts up, press the recording buon.
Aer the recording starts, the ashing red point and recorded me will appear on the upper le
corner of the live view page.
2.
Press the recording buon again to stop recording.
3.
Oponal: Select File on the main menu to view the recorded videos.
Note
●
If you want to record a period of me before recording starts, select Set → Camera → Record
Param. → Pre-Record to set pre-record.
●
If you want to record a period of me aer recording ends, select Set → Camera → Record
Param. → Post-Record to set post-record.
3.1.3 Tape
You can tape audios via the device.
Steps
1.
Aer the device starts up, press the taping buon.
Aer
the taping starts, the ashing white taping icon and taped me will appear on the upper
le corner of the live view page.
2.
Press the taping
buon again to stop taping.
Body Camera User Manual
3

HIKVISION DS-MCW406 Specifications

General

Brand	HIKVISION
Model	DS-MCW406
Category	Digital Camera
Language	English