Digital Video Recorder User Manual
87
Task 1: One-Key Enabling H.264+/H.265+ for All Analog Cameras
Step 1 Go to Menu > Record > Advanced.
Figure 5-34 Advanced Settings (for HWD-7100MH and HWD-7200MH series DVR)
Figure 5-35 Advanced Settings (for HWD-6200MH-G2 series DVR)
Step 2 Click Enable to enable H.264+/H.265+ for all the analog cameras and the following
attention box pops up.
Figure 5-36 Attention Box
Step 3 Click Yes to enable the function and reboot the device to have new settings taken effect.
Task 2: One-Key Disabling H.264+/H.265+ for All Analog Cameras
Step 1 Go to Menu > Record > Advanced.
Step 2 Click Disable to disable H.264+/H.265+ for all the analog cameras and the following
attention box pops up.
Figure 5-37 Attention Box
Step 3 Click Yes to enable the function and reboot the device to have new settings taken effect.
5.12 Configuring 1080P Lite
Purpose
When the 1080P Lite Mode is enabled, the encoding resolution at 1080P Lite (real-time) is
supported. If not, up to 1080P (non-real-time) is supported.
This chapter is appplicable to HWD-6200MH-G2 series DVR.
To Next Page
Loading...
Need help?
General
