HIKVISION iDS-E08HQHI-B User Manual

Digital Video Recorder User Manual
84
6.2 VCA Event Alarm
The device supports receiving VCA detections sent by connected IP cameras. Enable and configure
VCA detection on the IP camera settings interface first.
Note
● VCA detections must be supported by the connected IP camera.
● Refer to the network camera user manual for detailed VCA detection instructions.
6.2.1 Unattended Baggage Detection
Unattended baggage detection detects the objects left over in a predefined region such as the
baggage, purses, dangerous materials, etc., and a series of actions can be taken when the alarm is
triggered.
Steps
1. Go to System → Event → Smart Event.
2. Click Unattended Baggage.
Figure 6-3 Unattended Baggage Detection
3. Select a camera.
4. Check Enable Unattended Baggage Detection.
5. Optional: Check Save VCA Picture to save the captured unattended baggage detection pictures.
6. Set the detection rules and detection areas.
1) Select Arming Region. Up to 4 regions are selectable.

HIKVISION iDS-E08HQHI-B Specifications

General

Brand	HIKVISION
Model	iDS-E08HQHI-B
Category	DVR
Language	English