Digital Video Recorder User Manual
13
Note
If the network camera to add has not been activated, you can activate it in the network camera
list of camera management interface.
1.7.2 Add Network Camera Manually
Before you view live video or record video files, you must add network cameras to the device.
Before You Start
Ensure the network connection is valid and correct, and the network camera is activated.
Steps
1. Click on the main menu.
2. Click Custom Add.
3. Set the parameters. For example, IP Camera Address, Protocol, etc.
Note
Management port ranges from 1 to 65535.
To Next Page
Loading...
Need help?
General