Network Traffic Camera • User Manual
35
Edit Record Schedule
Select the day to set the record schedule.
Set all-day record or segment record.
If you want to set the all-day recording, check the All Day checkbox.
If you want to record in different time sections, check the Customize checkbox. set the Start
Time and End Time.
The time of each segment cannot be overlapped. Up to 4 segments can be set.
The default record type is Normal and you cannot edit it.
Check Select All and click Copy to copy settings of this day to the whole week. You can
also check any of the checkboxes before the date and click Copy.
Click OK to save the settings and exit from the interface.
Click Save to save the settings.
Set Storage Management
Purpose:
You can manage storage, view TF card information, format TF card, etc. in storage management.
Go to Configuration > Device Configuration > Encoding and Storage > Redundant
Storage.