Network Traffic Camera • User Manual
56
(Optional) Check Enable Black and White Mode at Night. When ICR is in night mode, you
can check Enable Black and White Mode at Night to keep the video in black and white
mode.
(Optional) Click Capture Test to test the effects after completing the adjustment.
(Optional) Reboot the device if you enable image rotation. For other parameters, they will
take effect in real time.
Set Video Image
Purpose:
The device supports dual-shutter. One shutter for video image and the other one for capture
image. You can set shutter parameters for video image.
Go to Configuration > Device Configuration > Image Parameters > Video.
Video Image Configuration
Adjust Brightness [0 to100].
Adjust Contrast [0 to 100]. It refers to the color contrast between the brightest part and
darkest part.
Enter Shutter Speed [120 to 40000 μs]. It refers to the length of time that a device's
shutter remains open.
Adjust Gain [0 to 100]. It refers to the ratio of the output signal to input signal.
Select Hue Range to adapt the display.
Select 3D DNR. It refers to the brightness noise reduction, saturation noise reduction and
original data reduction in the separation of video signals. Comparing with the general 2D
digital noise reduction, the 3D digital noise reduction function processes the noise
between two frames besides processing the noise in one frame. The noise will be much
less and the video will be clearer.
To Next Page
Loading...
Need help?
General
