Connecting a Computer
-Connect the D- Sub cable to “PC (PC IN)” on the rear of your set and the other end to the Video Card of your
computer.
-Connect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to “Audio Out” of the
sound card on your computer.
-This device may not be compatible with all PC video/graphic cards.
Connecting AUDIO
-Connect RCA audio cables to “R -AUDIO - L” on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theater.
Connecting USB Connector Devices
For service only.
Optical Audio
Connect an optical audio device to this jack (Toslink optical cable is needed). Note: DTV and HDMI output only.
Headphone
Headphones can be connected to the headphone output ( ) on the side of your set. (While the headphone is
connected, the sound from the built-in speakers will be disabled. )
To Next Page
Loading...
Need help?
General