Adjusting the volume
To adjust the volume:
Press to increase or decrease the
volume.
Press [MUTE] to turn the sound off. Press
[MUTE] again to turn the sound back on.
Changing channels
To change channels:
Press to go to the next higher or lower
channel.
Or, Press the number buttons to select a
channel. For example, to select channel 120,
press 1, then 2, then 0.
Or, press [LAST] to go to the last viewed
channel.
Displaying channel lists
To display channel lists
Press [OK] to display the channel list.
1. Press to select the channels.
2. Press [OK] to enter the channels.
3. Press [EXIT] to exit the menu.
[V+/V-]
[P+/P-]
[P+/P-]
14
Turning your TV on and off
To turn your TV on and off:
Turning on: Connect the TV to an AC power outlet
and turn on the power switch located below the front
right hand side of unit. The power indicator will
initially be red and then will change to blue. A few
seconds later an image will appear on the screen.
Turning off to standby mode: Press [ ] on the front
panel or on the remote control to switch to standby
mode. You can activate the unit again by pressing
[ ].
Power indicator: Red indicates standby mode. Blue
shows that the unit is on.
There will be no light when the power switch is in the
off position.
Notes:
Turn the power switch off when you do not intend to use
the TV for long periods, for example overnight.
Remove the connection from the wall power outlet if
you do not intend to use the unit for longer periods, for
example if you plan to be away a few days. Wait at least
5 seconds after turning off if you want to re-start the TV.
[P+/P-]
OK]
Selecting the video source
Selecting the video source depending on the video
device you have connected to your TV, you can select
DTV, TV, AV, S-Video, Component, PC-RGB, and
HDMI as the video source.
To select the video source:
Press [SOURCE] . When the list of video sources
appears, Press to select the source, then
Press [ to enter.
Using the TV features
Volume
22
22 C-69
TV
PAL DK
Mono
Channel List
1 TV1
2 BBC1
3 S-01
4 S-02
5 C-42
6 S-04
7 C-02
TV
TV
TV
TV
TV
TV
TV
EXIT
OK
Input Source
Analog TV
Digital TV
AV1
AV2
S-Video
Component1
Component2
PC-RGB
HDMI1
HDMI2
HDMI3
Select
Exit
Confirm
To Next Page
Loading...
Need help?
General