Using the TV features
Adjusting the Option Menu
1 Press [MENU] to open the main menu.
2 Press to select Option, then press to
enter the Option menu.
In the Option OSD, you can set the following items:
Blue Screen - Press to turn on or turn off the
Blue Screen effect by select “On” or “Off”. (Only
available for ATV)
Osd Settings
Osd Settings contains Transparency and OSD
Timeout, when you select Osd Settings, press
[V+/OK] to enter, you can set their values by using
.
vTransparency: you can adjust the Osd
transparency from 0-6.
vOsd Timeout: The time it takes the OSD to
disappear when no operations are performed.
You can change it from 5 seconds, 10 seconds,
15seconds, 20seconds, 25seconds, 30seconds,
35seconds, 40seconds, 45seconds, 50seconds,
55seconds and 60seconds.
Time - Press to select Time in the Option
Osd, and press [OK] to enter.
It contains Clock, Off Time, On Time, Sleep Timer
and Time Zone.
[V+/V-] [P-/OK]
[V+/V-]
[V+/V-]
[P+/P-]
19
Clock - display current date and time.
Off Time - 1 Press to select Off Time, and press
[OK] to enter.
2 Press to select Repeat, Hour or Minute,
and use to set the Off time.
3 Press MENU to exit.
On Time- 1. Press to select On Time, and press [OK]
to enter.
2. Press to select Activate, Hour or
Minute, and use to set On time.
3. Press MENU to exit.
Sleep Timer - Press to set the sleep timer between 0-
240minutes.
Time Zone - Press to set a time zone corresponding
to your region.
Restore Factory Default
Select Restore Factory Default and press [OK], you will
be asked via the OSD to confirm your selection. Press
[OK] and your TV will be reset to factory settings.
Note: Password and parental options are NOT reset.
[P+/P-]
[P+/P-]
[V+/V-]
[P+/P-]
[P+/P-]
[V+/V-]
[V+/V-]
[V+/V-]
Repeat Off
Hour 00
Minute 00
OK
Activate Mon~Sat
Hour 0
Minute 00
Volume 30
Mode DTV
OK
Select
Conf irm
Exit
Blue Screen Off
Osd Settings
Time
Restore Factory Default
Option
Select
Conf irm
Exit
Option
Clock 01/Jul 12:00
Off Time Off
On Time Off
Sleep Timer Off
Time Zone Western Australia GMT+B