Hitachi 3100 User Manual

Configuring non-file serving interfaces
On an external SMU only
, to configure the IP address of the eth1 interface:
Procedure
1. Navigate to Home > SMU Administration > Management Network
to display the Management Network page.
2. Enter the requested information. The Management Network page enables
the Administrator to configure the IP address of the eth1 interface. The
default address for the eth1 interface is 192.0.2.1. The eth1 address
must end with . 1, in order to simplify the management relationship of
the SMU with secondary devices. The NAT Port range is provided for
information only.
3. Once defined, record the IP address settings separately for future
reference, and click apply.
Configuring devices on the system monitor
The system monitor allows you to easily display and monitor the devices that
make up your storage system.
Managing networks and devices 69
Hitachi NAS Platform Network Administration Guide

Hitachi 3100 Specifications

General

Brand	Hitachi
Model	3100
Category	Server
Language	English