Press the MENU button. The MAIN
MENU appears.
Press the cursor DOWN button to
select INSTALL.
Once highlighted, accept selection.
1
2
3
Press the cursor DOWN button to
select LANGUAGE.
4
Adjust to your chosen language using
the LEFT/RIGHT cursor buttons.
5
To return to normal TV operation press the TV button on your handset.
6
REPEAT STEPS 1 - 3 ABOVE.
Press the cursor DOWN button to select INSTALLATION.
Once highlighted, accept selection.
1
4
5
Installation
This enables you to repeat the Autotune installation if required, e.g. if you move house etc.
Please now turn to ‘automatic tuning procedure’, found in the ‘tuning in’ section of this manual, and
follow the instructions, starting from STEP 4 and continuing through to STEP 7.
important note on Installation
Do not switch your TV on until all external equipment is connected. If you have a Video
Cassette Recorder or a Satellite receiver connected to this TV please ensure that they
are switched on before automatic tuning begins. In the case of a VCR, if it is not Viewlink compatible, insert a pre-
recorded tape and begin playback of your equipment. If it is Viewlink compatible leave VCR in Standby (See viewlink
section of this manual for details). With a Satellite receiver select Sky News. These measures ensure that all your
external equipment is tuned in during the autotune procedure.
38
To Next Page
Loading...
Need help?
General