41
PC Mode
This enables you to connect your home computer, or laptop computer, to your TV to use the plasma screen as a display.
Once all equipment has been connected correctly and switched on, press the AV button on
your handset until ‘PC’ is displayed on the screen. Once you have entered PC Mode,
whatever is being displayed on your PC monitor, (or laptop screen), will be displayed on
your plasma screen. You can now setup the screen to suit your viewing preferences.
important note on Installation
Switch off your Plasma screen and AVC Unit before connecting or disconnecting any external equipment. Do
not switch them on until all external equipment is connected correctly.
1
2
AVC UNIT
Connect the PC
AUDIO LEAD
between the PC and
AVC Unit.
1
Connect the RGB
LEAD between the
PC and AVC Unit.
2
PC
b
a
a
b
PC AUDIO LEAD
RGB LEAD*
Press the 16:9 button on your handset once. ‘PC FULL’ will be displayed on the screen. Press the 16:9 button
again and PC NORMAL will be displayed, and press again and PC REAL will be displayed. Please see
opposite for details on each of these modes.
1
selecting the view mode
You can now select your preferred view mode. There are 3 modes of display to choose - PC FULL, PC NORMAL and PC
REAL.
* It is recommended that you
use an interface cable (TP-
RGBVG) to connect between the
AVC unit and your PC (Not
supplied).
Option
To Next Page
Loading...
Need help?
General