Select VIDEO to adjust picture settings and improve picture quality.
Use this function to change the contrast between black and white levels in the picture. This adjustment
will only affect the picture when ADVANCED SETTINGS PERFECT PICTURE is OFF.
Use the THUMB STICK G or H to highlight the function to be adjusted.
Press the THUMB STICK F or E to adjust the function.
Press EXIT to quit menu.
NOTE: 1. It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT:
Y-P
B
P
R
Input jacks.
2. If you are using the COMPONENT VIDEO input jacks (Y-P
B
P
R
) and notice that the TINT and COLOR are
abnormal, check to make sure that COMPONENT SET-COLOR SYSTEM is set properly.
Use this function to adjust flesh tones so they appear natural. (See notes below.)
Use this function to adjust overall picture brightness.
Use this function to adjust the amount of fine detail in the picture.
When RESET is selected, press down on THUMB STICK E to return video adjustments to factory
preset conditions.
CONTRAST
Use this function to adjust the level of color in the picture.
COLOR
TINT
BRIGHTNESS
SHARPNESS
RESET
To Next Page
Loading...
Need help?
General
