Hitachi VSP G1500 User Manual

Issuing commands for LDEVs within a LUSE device
A LUSE device is a group of LDEVs regarded as a single logical unit. Because
it is necessary to know the configuration of the LDEVs when issuing a
command, a new command is used to specify a target LU and acquire LDEV
configuration data, as shown in the following figure.
Figure 2-7 LUSE Device and Command Issue
CCI instance components on the host server
HORCM operational environment
The HORCM operates as a daemon process on the host server and is
activated either automatically when the server machine starts up or manually
by the startup script. HORCM reads the definitions specified in the
configuration file upon startup. The environment variable HORCM_CONF is
used to define the location of the configuration file to be referenced.
CCI software environment
2-9
Command Control Interface User and Reference Guide

Hitachi VSP G1500 Specifications

General

Model	VSP G1500
Category	Enterprise Storage System
Drive Types Supported	SSD, HDD
RAID Levels Supported	RAID 5, RAID 6, RAID 10
Controller Type	Dual Active Controllers
Connectivity	Fibre Channel (FC), iSCSI, FCoE
Power Supply	Redundant Power Supplies
Maximum Host Connectivity	256
Data Reduction Features	Deduplication, Compression
Operating System Compatibility	Windows, Linux, VMware
Management Software	Hitachi Command Suite
Cooling	Redundant Fans
Warranty	3 years standard warranty
Form Factor	Rack-mounted