Hitachi YUTAKI S COMBI Series User Manual


Capacity
The following parameters can be displayed by each month selecting the specied month or for all the months selecting “Total”.
REF Access Description
Default
Value
Range Steps Units Application
Notes
Capacity S SC S80 M
CpSH
Space Heating - - - kWh ○ ○ ○ ○ -
CpSC
Space Cooling - - - kWh ○ ○ ○ ○ -
CpDHW DHW - - - kWh ○ ○ ○ ○ -
CpSWP
Swimming pool - - - kWh ○ ○ ○ ○ -
CpTot Total - - - kWh ○ ○ ○ ○ -
8.6.2 System Conguration
“System conguration” contains the following features:
• General Options
• Timer and Schedule
• Water settings (*)
• Space Heating
• Space Cooling
• DHW
• Swimming Pool
• Complementary Heating
• Heat Pump
• Optional Functions
• I/O and Sensors
? NOTE
(*)This option is availbale only when the controller is set as “Room Thermostat”.
8.6.2.1 General Options
“General Options” menu is not visible while “Screed drying” operation is being carried out.
• Holiday Mode (*1)
• Air Eco Offset (*2)
• Room Thermostats (*3)
• Central Operation (*3)
? NOTE
• (*1):If Controller type (LCDM)= “Room” or “Unit + Room” and (Thermostat 1 (otC1)= “C1” or “C1+C2” when circuit 1 is ON) or (Thermostat 2 (otC2)=
“C2” or “C1+C2” when circuit 2 is ON).
• (*2): If Controller type (LCDM)= “Room” or “Unit + Room”.
• (*3): If Controller type (LCDM)= “Unit” or “Unit + Room”.
UNIT CONTROLLER
PMML0335A rev.1 - 04/2016
136

Hitachi YUTAKI S COMBI Series Specifications

General

Brand	Hitachi
Model	YUTAKI S COMBI Series
Category	Heat Pump
Language	English