5-9
The arm kick out system automatically stops the arm at the
preset height when raising the arm. (When shipping the ma
-
chine from the factory, the kick out system is adjusted so that
the bucket is stopped at a slightly lower position than the
maximum height.)
Adjust the arm stop position by moving the position of prox-
imity switch (1), When adjustment is required, consult your
nearest Hitachi dealer.
The lift arm auto leveler automatically stops the lift arm at the
preset height when lowering the lift arm. When the machine is
engaged in the loading/unloading work under the limited con
-
ditions, adjust the lift arm stop position so that the machine
can be more efficiently operated. Contact your nearest Hitachi
dealer when adjustment is required.
M4GB-05-002
To Next Page
Loading...
Need help?
General
