7-86
Be sure to check the wheel bolt torque by turning the bolt
in the tightening direction.
Tightening Torque: 890 N•m (90.8 kgf•m)
1. Lower the loader front to the ground. Apply the parking
brake.
2. Secure the front and rear frames with the lock bar and
pins.
3. Loosen all wheel bolts one turn. Note which way the
tread pattern is facing.
4. After jacking up the machine, securely support the ma
-
chine with blocks.
5. Remove the wheel bolts. Replace the tire.
6. With the tire raised off the ground, lightly tighten the
wheel bolts in order as illustrated to the right.
7. Lower the machine. Retighten the wheel bolts to specifi
-
cation in the order as illustrated to the right.
M4GB-07-102
M4GB-07-104
(Right) (Wrong)
Front
3
2
Check the external appearance of tires for any damage.
To Next Page
Loading...
Need help?
General
