Honda 2005 VTX1800C User Manual

53
Basic Operation & Riding
Basic Operation & Riding
This section gives basic riding instructions,
including how to start and stop your
engine, and how to use the throttle, clutch,
and brakes. It also provides important
information on riding with a passenger or
cargo.
To protect your new engine and enjoy
optimum performance and service life,
refer to Break-in Guidelines (page ).
To protect the catalytic converter in your
motorcycle’s exhaust system, avoid
extended idling and the use of leaded
gasoline.
........................Safe Riding Precautions . 54
............Starting & Stopping the Engine . 55
.........................................Preparation . 55
.............................Starting Procedure . 56
..................................Flooded Engine . 57
Bank Angle Sensor Ignition
.................................Cut-Off System . 57
....................How to Stop the Engine . 58
........................................Shifting Gears . 59
..................................................Braking . 61
...................................................Parking . 63
.........Riding with a Passenger or Cargo . 67
204
04/08/11 14:32:00 31MCH630_062

Honda 2005 VTX1800C Specifications

General

Engine Type	1795cc liquid-cooled 52° V-twin
Bore and Stroke	101.0mm x 112.0mm
Compression Ratio	9.0:1
Induction	PGM-FI with automatic choke
Transmission	Five-speed
Final Drive	Shaft
Front Suspension	45mm inverted fork
Front Suspension Travel	5.1 inches
Rear Suspension Travel	3.9 inches
Front Tire	130/70R-18
Rear Tire	180/70R-16
Wheelbase	67.5 inches
Ignition	Digital with three-dimensional mapping
Front Brakes	Dual 296mm discs
Rear Brakes	Single 316mm disc
Fuel Capacity	5.3 gallons